在過街天橋裝置遮陽蓬成了當今潮流，但是在裝置過程中呈現的很多問題，直接影響了遮陽蓬的運用壽命，如今濟南遮陽蓬廠家給大家解答下裝置遮陽蓬有哪些留意事項，希望能給客戶一些協助。

It has become a trend to install sunshades on street overpasses, but many problems in the installation process have directly affected the service life of sunshades. Now, Jinan sunshade manufacturer has explained to you the precautions for installing sunshades, and hopes to give customers some assistance.

遮陽蓬的裝置步驟及留意事項如下：

The installation steps and precautions of sunshade are as follows:

1、骨架桁條外表需平整，不能有毛刺、焊疤等;假如發現這些問題一定要打磨平整以后再裝置，否則會劃傷外表UV涂層，招致老化的加快。

1. The surface of the framework stringer shall be flat without burrs, welding scars, etc; If these problems are found, they must be polished and leveled before installation, otherwise the UV coating on the surface will be scratched, causing accelerated aging.

2、骨架上的油漆、涂料必需枯燥，不得殘留揮發性溶劑;由于耐酸堿性較弱，需在揮發終了后再裝置。

2. The paint and coating on the skeleton must be dry, and no volatile solvent shall remain; Due to weak acid and alkaline resistance, the device shall be installed after the volatilization is completed.

3、把EPDM膠條鋪設并粘貼于骨架上;這樣可加固與骨架的貼切度，增加承重才能。

3. Lay and paste the EPDM adhesive tape on the skeleton; In this way, the cohesion with the skeleton can be strengthened and the bearing capacity can be increased.

4、檢測骨架上椽子間的中心間隔及檁條間的中心間隔，須契合設計請求;如跨距過大，會影響遮陽蓬的平安性。

4. Detect the center spacing between rafters on the skeleton and between purlins, which must meet the design requirements; If the span is too large, the safety of the sunshade will be affected.

5、用專用封口膠帶封鎖板材端孔后鋪設板材;板材之間用H條銜接，再接口處打上專用封口膠，能夠有遮陽蓬裝置的留意事項效的避免遮陽蓬漏水。

5. Seal the end hole of the plate with special sealing tape and then lay the plate; H-strips are used to connect the plates, and special sealing glue is applied at the interface, which can effectively prevent the sunshade from leaking.

6、用一種由鋁合金銜接型材和密封墊，組成的裝配系統將板材固定;這樣遮陽蓬就裝置完成了。

6. An assembly system composed of aluminum alloy connecting profiles and sealing gaskets is used to fix the plates; So the sunshade is installed.

此外您要知道遮陽蓬有良好的防紫外線功用，不只使人體皮膚免受紫外線的侵襲，而且大大延長了室內裝修和家具的運用壽命。更多相關該產品的事項都可以來聯系我們http://79372.cn！

In addition, you should know that the sunshade has a good UV protection function, which not only protects human skin from UV, but also greatly extends the service life of indoor decoration and furniture. Please contact us for more information about this product http://79372.cn ！